Page 6
7. Run wiring from the antenna unit to the location where it will be fed into the vehicle.
Make sure external wiring is tied down securely (to a hand rail for example) (Fig. 5).
8. Drill 3/4” hole through the cab or use an existing hole to feed the wiring inside the cab.
Seal opening with cab compatible sealant so that it is entirely waterproof (inside and
outside of the hole).
IMPORTANT! Bracket mounting holes and wiring hole must be sealed so they are
completely waterproof. Sealant must be cab compatible.
Fig. 5
TYPICAL CAB INSTALLATION USING THE MB100 BRACKET
(Bracket sold separately)
Comments to this Manuals