VuQube V20 Operations Instructions download pdf (Page 22)

1. Turn on the TV and receiver. “Searching for Satellite” or similar will appear on TV screen.

2. On VuQube controller, press and hold the

ON button for 3 FULL SECONDS

Power light turns steady GREEN.

Page 20

SECTION 4

OPERATION

IMPORTANT: There must be a clear “line of sight” to the southern sky. Mountains, buildings, trees,

telephone poles, etc. can all block the satellite signal from reaching the dish.

The distance driven since last performing a search may affect how long it takes the

VuQube to find the satellite.

Satellite TV and receiver technology are constantly changing. If you experience difficulty

go to www.kingcontrols.com or contact the King Controls Service Department at

(800) 982-9920.

a) flashes a variety of colors

for about 30 seconds

b) RED-flashing

c) GREEN-flashing (may start

flashing RED again)

d) GREEN-steady

unit performs self-diagnostic

search in progress

potential satellite found

satellite(s) found and search is complete

STATUS LIGHT SYSTEM STATUS

3. When the status light is steady green, select a channel or the program guide to view your

programming. Enjoy! (DO NOT TURN THE VUQUBE OFF IF USING THE AUTOMATIC

SATELLITE SWITCHING FEATURE.)

Note: If the status light is steady GREEN and your programming does not appear, press the reset button on your

DIRECTV receiver. If using Dish Network, hold the receiver power button in for 10 seconds to reset your

receiver. Consult your receiver owner’s manual for further details. (Note that it may take several minutes

for the guide to re-download.)

When receiver reset is complete and the guide is downloaded, select a channel or the program guide to

view your programming.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

VuQube V20 Operations Instructions Page 22