DIRECTV
6
IMPORTANT! The KING Flex will not receive channels broadcast from DIRECTV’s Ka band satellites at 99°
and 103°.
The KING Flex will not work with SWM only receivers.
NOTE: Your local channels may not be available when traveling outside your home area.
Section 3 OPERATION
POWER UP
1. Make sure all connections are made as shown on page 3.
2. Press POWER to turn on KING Flex controller.
• All lights turn on briey.
• The COAX CONNECTION light ashes 10 times.
• The SCAN PROGRESS lights ash 3 times to indicate the currently selected service
conguration and then turn off.
• If the unit is operating properly, the COAX CONNECTION light will remain on and all other
lights will turn off.
3. Turn the TV and satellite receiver on.
• Antenna is now ready to scan for satellites. Go to next page.
IMPORTANT!
The antenna unit requires a
“direct line of sight” to the
satellites for signal reception.
Any tall objects can block the
signal from reaching the antenna.
Comments to this Manuals